Where every firing is a phoenix moment
Made for artists who rise
Aussie Metal Clay was born from a need for a metal clay that could change, adapt, and evolve alongside the artist using it.
Inspired by makers who push boundaries and trust the fire, we believe every design deserves the chance to become something more than it began.
Every firing is a phoenix moment — and every artist deserves to experience it.
Australian Owned and Made
Featured Products
PMC TESTER CALL
✨ CALLING ALL PMC LOVERS! ✨
If you’re a true PMC die-hard metal clay artist with hands-on experience using PMC3 or PMC Flex, I’d love to hear from you!
I’m looking for a small team of experienced PMC artists to try a brand new Aussie Metal Clay .999 silver clay that has been developed to feel much like the PMC3 or PMC Flex many artists know and love.
Early testing has been very promising, and I would love for you to confirm this by testing it in your own studio
I’m looking for testers who:
• have genuine hands-on experience with PMC3 or PMC Flex
• can confidently compare feel, workability and performance
• are happy to give honest feedback directly to me
• on success, are willing to share your thoughts broadly in FB groups, with friends, and in other areas of social media
Tester options
To show my appreciation, this is my discounted cost for testers:
AUD $68.00 per tester pack
You can choose one of the following:
• 10g PMC3 version
• 10g PMC Flex version
• 5g of PMC3 & 5g of PMC Flex version
Your feedback will help me better understand how this clay performs in the hands of real artists, and help shape where we go next.
Are You Interested in being part of the tester team?
Please comment below & send me a message (FB Messenger) with:
1. Your experience with PMC3 and/or PMC Flex
2 Whether you’d prefer 10g of one version or 5g of each
I’d especially love to hear from artists who truly know the feel of PMC and would enjoy helping test this exciting new development.
Aussie Metal Clay – Gold Bronze
Don’t forget to add the Aussie Metal Clay (AMC) Ancillary products to your order for the best experience – All specifically designed for Aussie Clays!
Aussie Lube – A Metal Clay Release product
Kim’s ClayStay – A Metal Clay Glue
Aussie Refresh – A Metal Clay Rehydrator
MADE IN AUSTRALIA – Created and made by Ros Bailey, Innovated by Kim Booklass
Testing: We recommend that you do a test strips on each of the clays to make sure that the temperatures are right for your kiln, as each and every Kiln tends to run to their own specific temperature & this will need to be checked before you put a lot of work into a piece.
All firings of base metal need to be done in a high quality activated Coconut carbon in either a stainless steel pan or a ceramic bisque container. Your kiln schedule will be provided with your clay.
All the essentials you need to work with your clay in this Travel Kit ~ The Aussie Refresh (Clay Rehydrate) 10ml, Kim's ClayStay (Metal Clay Glue) 10ml & Aussie Lube (Metal CLay Release) 10ml Travel Kit
Can be used on all clays!
Kim's ClayStay - Metal Clay Glue
Kim's ClayStay is metal clay glue used to glue together two pieces of clay. It is should not be used as clay filler.
Instructions:
Shake the ClayStay before use.
Keep lid on when not in use.
Wipe tip after use, or when changing type of clay.
Lid is child proof
Forming Bonds: Do not over-saturate clay. Clay pieces need to join flush. If they do not, add metal clay to fill gap.
Unfired to Unfired: Fit tightly, add clay
Unfired to Fired: ClayStay plus fresh metal clay.
Fired to Fired: Roughen surfaces, ClayStay plus fresh metal clay.
Syringing: Mix Claystay with Premium Aussie Clays to enable you to Syringe - more details on the Aussie YouTube Channel
Cutting machines, carving, sculpting: Apply thin coat and let dry.
Full Instructional Videos on Aussie Metal Clay YouTube Channel
Note: Kim's ClayStay is a METAL CLAY GLUE only not a gap filler.
Aussie Refresh - Clay Rehydrate
Before Use: Shake bottle well to ensure solution is mixed well. Use Aussie Refresh to make your powder into a Clay. Spray a little at a time and allow the powder to absorb Aussie Refresh as you are mixing - once you have your clay to your desired consistency you will be ready to use your clay! Repeat as often as required to maintain consistency of your clay.
Aussie Lube - Metal Clay Release
Aussie Lube (Metal Clay Release) is a non stick, non toxic, metal clay release.
Shake well before each use
Use Aussie Magic Lube on all your AMC Low Relief Paper Textures for a very clean relief on your chosen design
Aussie Magic Lube can also be used on AMC Texture moulds
Use Aussie Magic Lube to lightly treat your work surface, textures, moulds and tools prior t0 rolling and or impressing your metal clay.
If you spray too much Aussie Metal Clay Clay Lube, you can blot with a paper towel. If it is a texture, you can use a paint brush to spread it over your texture mat.
Do NOT spray on your Aussie Magic Lube directly on clay. This product is NOT a hydrator or to be used as you would water.
Keep out of the reach of children and pets. Do not ingest.
https://www.youtube.com/watch?v=WpMlwkEf6pw
How it Started…
Aussie Metal Clay — where every firing is a Phoenix moment.
More than twenty years ago, a close friend posed a quietly revolutionary question: What if metal could behave like pottery?
The idea that metal could begin its life as a soft, workable clay—and then be transformed in a kiln into solid metal—was instantly captivating. What started as a casual conversation about creating a material better suited to Kim’s sculpting practice soon ignited something far greater. Ros Bailey’s journey into metal clay began with a simple, determined thought: “It can’t be rocket science.”
That single question led to hands-on experimentation. Originally developed to meet the creative needs of one artist, the clay quickly attracted wider interest. Demand from the USA for high-quality, Australian-made metal clay grew, and through a successful Kickstarter campaign, Aussie Metal Clay was born.
Driven by a passion for innovation, uncompromising quality, and Kim’s invaluable input from an artist’s perspective, Ros went on to develop a versatile range of metal clays—including base metals, fine silver, sterling silver, and Argentium Silver—giving artists greater freedom to explore, refine, and express their ideas.
Alongside these clays came essential supporting products: Kim’s ClayStay (the original metal clay glue), Aussie Refresh (a metal clay rehydrator, formerly known as Kim’s ClaySpray), and Aussie Lube, a metal clay release. Together, these innovations helped shape Aussie Metal Clay into a brand trusted by a global community of makers.
Today, Aussie Metal Clay remains deeply committed to supporting artists worldwide through continual refinement, collaboration, and innovation.
Be inspired by Aussie Metal Clay.
Turn your ideas into reality.
Where every firing is a Phoenix moment.
Follow us on social
Contact Us
We’d love to hear from you.
Whether you have a question, need help choosing the right product, or just want to talk through an idea, we’re here for you. No question is too small, and no message is a bother — if it matters to you, it matters to us.
Fill in the form below and we’ll get back to you as soon as we can.
info@aussiemetalclay.com
+61 0417-068-519