Featured Products
All the essentials you need to work with your clay in this Travel Kit ~ The Aussie Refresh (Clay Rehydrate) 10ml, Kim's ClayStay (Metal Clay Glue) 10ml & Aussie Lube (Metal CLay Release) 10ml Travel Kit
Can be used on all clays!
Kim's ClayStay - Metal Clay Glue
Kim's ClayStay is metal clay glue used to glue together two pieces of clay. It is should not be used as clay filler.
Instructions:
Shake the ClayStay before use.
Keep lid on when not in use.
Wipe tip after use, or when changing type of clay.
Lid is child proof
Forming Bonds: Do not over-saturate clay. Clay pieces need to join flush. If they do not, add metal clay to fill gap.
Unfired to Unfired: Fit tightly, add clay
Unfired to Fired: ClayStay plus fresh metal clay.
Fired to Fired: Roughen surfaces, ClayStay plus fresh metal clay.
Syringing: Mix Claystay with Premium Aussie Clays to enable you to Syringe - more details on the Aussie YouTube Channel
Cutting machines, carving, sculpting: Apply thin coat and let dry.
Full Instructional Videos on Aussie Metal Clay YouTube Channel
Note: Kim's ClayStay is a METAL CLAY GLUE only not a gap filler.
Aussie Refresh - Clay Rehydrate
Before Use: Shake bottle well to ensure solution is mixed well. Use Aussie Refresh to make your powder into a Clay. Spray a little at a time and allow the powder to absorb Aussie Refresh as you are mixing - once you have your clay to your desired consistency you will be ready to use your clay! Repeat as often as required to maintain consistency of your clay.
Aussie Lube - Metal Clay Release
Aussie Lube (Metal Clay Release) is a non stick, non toxic, metal clay release.
Shake well before each use
Use Aussie Magic Lube on all your AMC Low Relief Paper Textures for a very clean relief on your chosen design
Aussie Magic Lube can also be used on AMC Texture moulds
Use Aussie Magic Lube to lightly treat your work surface, textures, moulds and tools prior t0 rolling and or impressing your metal clay.
If you spray too much Aussie Metal Clay Clay Lube, you can blot with a paper towel. If it is a texture, you can use a paint brush to spread it over your texture mat.
Do NOT spray on your Aussie Magic Lube directly on clay. This product is NOT a hydrator or to be used as you would water.
Keep out of the reach of children and pets. Do not ingest.
https://www.youtube.com/watch?v=WpMlwkEf6pw
Aussie Metal Clay – Gold Bronze
Don’t forget to add the Aussie Metal Clay (AMC) Ancillary products to your order for the best experience – All specifically designed for Aussie Clays!
Aussie Lube – A Metal Clay Release product
Kim’s ClayStay – A Metal Clay Glue
Aussie Refresh – A Metal Clay Rehydrator
MADE IN AUSTRALIA – Created and made by Ros Bailey, Innovated by Kim Booklass
Testing: We recommend that you do a test strips on each of the clays to make sure that the temperatures are right for your kiln, as each and every Kiln tends to run to their own specific temperature & this will need to be checked before you put a lot of work into a piece.
All firings of base metal need to be done in a high quality activated Coconut carbon in either a stainless steel pan or a ceramic bisque container. Your kiln schedule will be provided with your clay.
